3DXMAX® PC/ABS 3D Printing Filament
3DXMAX® PC/ABS (polycarbonate + acrylonitrile butadiene styrene) is a premium high-heat 3D printing filament. PC/ABS alloys the mechanical properties & high-heat resistance of PC with the printability of ABS and allows for the printing of functional prototypes and production parts with very fine detail and excellent surface quality. 3DXMAX® Low-Gloss PC/ABS is suitable for use in both consumer-grade and industrial FDM/FFF printers that have a heated print bed. Made by 3DXTECH® in the USA.
Filament Diameter Specs:
- 1.75mm +/- 0.05mm
- 2.85mm +/- 0.05mm
Recommended Print Conditions:
- Extruder Temp: 270-290°C
- Bed Temp: 110 - 120°C
- Bed Prep: 3DXTech Polyimide Tape, ABS / Acetone Slurry
- Enclosure: Although not 100% necessary, we recommend using a printer with an enclosure to help keep some heat in while printing with PC/ABS
- Support: Our Aquatek water soluble support works great to create complex parts. This support can be found HERE.
- Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE.