Black 4kg PETG Filament

MAX-G™ PETG, 4kg

$99.95

MAX-G™ PETG Filament, Jet Black

MAX-G™ PETG is made using only premium resins and colorants.  Our PETG is a durable material that has excellent Z-layer strength while remaining flexible.  The base resin used in our PETG filament is FDA approved and has improved chemical resistance compared to PLA or ABS - and it is suitable for cleaning with isopropyl alcohol as needed.  

Benefits of MAX-G™ PETG include:

  • Superior Chemical Resistance vs. ABS and PLA
  • BPA Free, FDA Compliant
  • Amorphous:  Low and near isotropic shrinkage
  • Low moisture absorption:  3X lower vs. ABS
  • Very low odor emitted during printing

4kg Reel Dimensions:  12" diameter, 3.5" wide, 2" center hole

Recommended Print Conditions:

  • Extruder:  Ideally 230 to 260°C
  • Platform Temp:  60 to 90°C
  • Platform Prep:  Clean glass w/ Kapton Tape, PVA-based glue, or hairspray
  • Support:  Our Aquatek water soluble support works great to create complex parts.  This support can be found HERE.  
  • Drying Instructions:  Please see the following instructions for when you want to dry out this filament, HERE.