BVOH Water Soluble Support Pellets
Make your own high-performance BVOH support filament or use as support material with pellet fed printers.
- Pre-dry before extrusion at 50°C for 4-6 hours. A toaster oven works fine for this. Do your family a favor and do not dry the resin in your kitchen oven! (Wet material will extrude with bubbles present in the filament. If this happens, dry the resin more before processing.)
- Extrusion Temp: 150 - 170°C depending on your extruder set-up.
- Do not cool using water tanks - this is a water soluble material and will dissolve in the water.
- BVOH filament is relatively brittle and filament made using this polymer may be difficult to handle without breaking.
Please note: Additional shipping charges may apply on orders over 10kg