15% Carbon Fiber PP (Polypropylene) - Pellets.
Ideal for home extrusion enthusiasts. Make your own CF-PP filament with a home-extruder such as the Filabot and Filastruder or others that are set-up for high-temp extrusion.
Please note: Additional shipping charges may apply on orders over 10kg.
- Pre-dry before extrusion at 50°C for 4-6 hours. PP-based materials typically don't require pre-drying, but the addition of CF often leads to wicking of some moisture and pre-drying is recommended. A toaster oven works fine for this. Do your family a favor and do not dry the resin in your kitchen oven! (Wet material will extrude with bubbles present in the filament. If this happens, dry the resin more before processing.)
- Extrusion Temp: 160-190°C (depending upon how your heater bands, thermocouple, and PID are configured.)