FiberX TPU+GF30 (60D)

FibreX™ TPU+GF30 Thermoplastic Polyurethane 3D Printer Filament

FibreX™ TPU+GF30 elastomer is an engineering-grade material that we chose based on its balance of printability, flexibility, chemical resistance, and toughness. 3DXFLEX™ TPU+GF30 has a hardness of 60D, allowing you to make very tough, impact resistant, flexible prints. We recommend direct-drive extruders, but experienced users can be successful with Bowden-type drives as well.

Print Recommendations

Extruder Temp

230-255°C

Bed Temp

23°-50°C

Heated Chamber
Not required

Nozzle Specs
0.4mm diameter minimum
Hardened Steel Nozzle

Bed Adhesion
Magigoo Bed Prep

Layer Height
0.25mm or higher

Drying Specs
65°C for 4 hours

Supports
Water Soluble Support

Benefits of FibreX™ TPU+GF30 (60D) Include:

• Shore 60D semi-flex hardness
• Ease of printing compared to similar flexible materials
• Excellent layer bonding
• Outstanding fatigue resistance
• Very low odor emitted while printing
• Low moisture absorption
• Retains flexibility even at low temperature
• Styrene and BPA free

Technical Data Sheet

Click to open this material’s TDS.

Safety Data Sheet

Click to open this material’s TDS.

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

• Extruder: 230-255°C
• Bed Temp: 23-40°C
• Bed Prep: Magigoo Bed Prep or 3DXTECH Polyimide Tape gives us the best results
• Heated Chamber: Not required
• Supports: AquaTek™ water soluble X1 USM Universal Support Material works ideal for complex parts
• Drying Instructions: 65°C for 4 hours