Triton 3D – Stratasys Compatible Carbon Fiber ABS
Triton 3D Carbon Fiber ABS was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to Carbon Fiber ABS. This grade of CF ABS is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.
TriMax™ CF-ABS is a high-performance carbon fiber reinforced ABS filament ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Made using Sabic® MG-94 premium ABS and High-Modulus Carbon Fiber.
Please note: We performed hundreds of hours of testing on this grade in Stratasys® printers – both on our in-house Dimensions & Fortus printers and with outside beta testers. Due to the abrasive nature of carbon fiber, you should anticipate a 50% reduction in tip-life due to higher wear rates vs. unfilled ABS.
Don’t forget to order your Stratasys Compatible Break Away Support.
We provide the EEPROM chip for your printer (Classic and Plus Style Chip). All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]
Refill and save $$$ over Stratasys® Carbon Fiber ABS.
Technical & Safety Data Sheets can be found on Triton3D.com