Triton 3D – Stratasys Compatible ESD-Ultem 1010

$795.00

Stratasys Compatible ESD-Ultem 1010 is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection, high thermal properties, high mechanical properties, and it is inherently flame retardant.

Triton 3D – Stratasys Compatible ESD-Ultem 1010

Triton 3D ESD-Ultem 1010 was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to ESD-Ultem 1010. This grade of ESD-Ultem 1010 is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.

TriStat™ ESD Ultem™ PEI is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection, high thermal properties, high mechanical properties, and it is inherently flame retardant. Manufactured with consistency in mind using Sabic Ultem™ PEI resin and then compounded according to a proprietary formulation of carbon additives and process / dispersion modifiers – giving you a filament with excellent printing characteristics and consistent ESD properties.

Don’t forget to order Stratasys Compatible Ultem 1010 Break Away Support.

We provide the EEPROM chip for your printer (Classic and Plus Style Chip).  All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]

Refill and save $$$ over Stratasys® ESD-Ultem 1010.

Gearbox HT2™ 3D Printer: Print industrial-grade parts using our Stratasys® Compatible ESD-Ultem® 1010 and more with the new Gearbox™ HT2 High-Temp 3D Printer.

Benefits of Stratasys Compatible ESD-Ultem 1010 include:
High Thermal Properties: 217°C Tg, 205°C HDT @ 1.8MPa [Superior to Antero PEKK] Consistent surface resistivity 10^6 to 10^7 ohm surface resistivity on 3DP sample using concentric ring test method
Inherent flame resistance
Long-term hydrolytic stability
Excellent dimensional stability (amorphous with low creep sensitivity and low/uniform coefficient of thermal expansion) with highly reproducible part-to-part dimensions
Exceptional strength and modulus, even at elevated temperatures
Very good resistance to a broad range of chemicals
Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies

Technical & Safety Data Sheets can be found on Triton3D.com

ULTEM™ is a registered trademark of Sabic Innovative Plastics.
Triton manufactures this filament using Sabic ULTEM™ 1010 PEI resin.  

Questions?

Send us a message and we'll reach out as soon as we can!