Triton 3D – Stratasys Compatible Nylon 12CF
Triton 3D CF Nylon 12 was formulated to be 100% compatible with your Stratasys Fortus® printers and comes with a replacement EEPROM chip at a fraction of the cost of OEM Stratasys® branded filament. Our Nylon 12 + chopped carbon fiber is 100% guaranteed to work in your Stratasys® PA12CF compatible printers. Nylon 12 [PA12] absorbs less moisture than many other Nylons and retains its mechanical properties long after exposure to humid environments. Parts printed with PA12 also benefit from improved chemical resistance vs. many other nylons – including fuel, oil, lubricants, and many common solvents seen in industrial settings. Our Stratasys Compatible Nylon 12CF is also ESD-safe with a surface resistance value of 10^7 ohm/sq on printed specimen.
We provide the EEPROM chip for your printer (Plus Style Chip). All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]
Refill your Fortus with us and save $$$ over Stratasys® Nylon 12CF
Please note that Nylon 12CF is abrasive and will reduce the useful life of tips that are supplied by Stratasys. Our T20C tips are made using hardened steel and were designed specifically for printing Nylon 12CF and other abrasive materials. You can find our Nylon 12CF compatible tips [HERE].
Technical & Safety Data Sheets can be found on Triton3D.com
Send us a message and we'll reach out as soon as we can!