Also known as “ringing” or “ghosting,” vibration defects appear as repeated ripples near sharp corners. These vibrations come from rapid direction changes, and while mostly cosmetic, they indicate mechanical or speed-related issues that can affect precision prints.
Symptoms:
-
Wavy ripples near corners.
-
Echo-like patterns following features.
-
Consistent repeating lines in same areas.
Causes:
-
High print speed/acceleration.
-
Loose belts or pulleys.
-
Printer frame not rigid.
Troubleshooting Steps:
-
Lower acceleration and jerk settings.
-
Tighten belts and pulley screws.
-
Add vibration dampers to stepper motors.
-
Reduce print speed slightly.
Prevention Tips:
-
Place printer on stable, vibration-free surface.
-
Use slicer features like “linear advance” to reduce resonance.
