ThermaX™ MTS1 Medium-Temp Support Filament [PC Break Away Support]
MTS1 Break Away Support was developed for our Gearbox™ HT2 3D Printer. This material is specifically formulated as a break away support for PC model materials. Suitable for open-source printers with non-heated chambers and those with chambers up to 140°C.
Gearbox HT2™ 3D Printer: Print industrial-grade parts using our MTS Filament and more with the new Gearbox™ HT2 High-Temp 3D Printer.
Print Recommendations
![ThermaX MTS1 Medium-Temp Support [PC BAS] Ext Temp 1 Ext Temp 1](https://www.3dxtech.com/wp-content/uploads/2021/01/Ext-Temp-1-1024x1024.jpg)
Extruder Temp
290-320°C
![ThermaX MTS1 Medium-Temp Support [PC BAS] Bed Temp Bed Temp](https://www.3dxtech.com/wp-content/uploads/2021/01/Bed-Temp-1024x1024.jpg)
Bed Temp
90-110°C
![ThermaX MTS1 Medium-Temp Support [PC BAS] Chamber Temp Chamber Temp](https://www.3dxtech.com/wp-content/uploads/2021/01/Chamber-Temp-1024x1024.jpg)
Heated Chamber
Recommended
90-140°C if possible
![ThermaX MTS1 Medium-Temp Support [PC BAS] Nozzle Settings Nozzle Settings](https://www.3dxtech.com/wp-content/uploads/2021/01/Nozzle-Settings-1024x1024.jpg)
Nozzle Specs
No special concerns
![ThermaX MTS1 Medium-Temp Support [PC BAS] Bed Adhesion Bed Adhesion](https://www.3dxtech.com/wp-content/uploads/2021/01/Bed-Adhesion-1024x1024.jpg)
Bed Adhesion
Magigoo Bed Prep
![ThermaX MTS1 Medium-Temp Support [PC BAS] Layer Height Layer Height](https://www.3dxtech.com/wp-content/uploads/2021/01/Layer-Height-1024x1024.jpg)
Layer Height
No special concerns
![ThermaX MTS1 Medium-Temp Support [PC BAS] Drying Filamen Drying Filamen](https://www.3dxtech.com/wp-content/uploads/2021/01/Drying-Filamen-1024x1024.jpg)
Drying Specs
80°C for 4 hours
![ThermaX MTS1 Medium-Temp Support [PC BAS] Water Soluble Support Water Soluble Support](https://www.3dxtech.com/wp-content/uploads/2021/03/Water-Soluble-Support-1024x1024.jpg)
Supports
N/A
![ThermaX MTS1 Medium-Temp Support [PC BAS] iconfinder 1 02 511559 Technical Data Sheet](/wp-content/uploads/2020/11/iconfinder_1-02_511559-300x300.png)
Technical Data Sheet
This material doesn’t yet have a formal SDS.
Benefits of MTS1 include:
- Excellent break away support for PC/ABS, PC, and PA materials
- Pre-programmed into the Gearbox HT2 for ease of printing
Filament Specifications:
1.75mm +/- 0.05mm in diameter
Recommended Print Settings:
- Extruder: 290-320°C
- Bed Temp: 90-140°C
- Bed Prep: Magigoo Bed Prep gives us the best results
- Heated Chamber: Recommended, held up to 90-140°C if at all possible
- Drying Instructions: 80°C for 4 hours