Small features like pins, posts, or text are tricky because each layer prints in seconds, giving little time for cooling. Without proper settings, these features melt, deform, or fail entirely.
Symptoms:
-
Small posts bend or melt.
-
Fine details blurred or deformed.
-
Missing small features.
Causes:
-
Overheating due to short layer times.
-
Print speed too high.
-
Extrusion too thick for feature.
Troubleshooting Steps:
-
Lower print speed for small details.
-
Enable minimum layer time in slicer.
-
Print multiple parts simultaneously to allow cooling.
-
Use smaller nozzle for finer detail.
Prevention Tips:
-
Optimize cooling fan usage.
-
Test with calibration towers for small features.
