ThermaX PEEK

$195.00$1,175.00

ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.

thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
thumbnail
 
Clear
SKU: Select options above Brand: ThermaX™ Categories: ,

ThermaX™ PEEK 3D Filament

ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. In fact, it’s one of the highest-performance plastics ever invented. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications where failure is not an option.

Ext Temp 1

Extruder Temp
375-410°C

Bed Temp

Bed Temp
130-145°C

Chamber Temp

Heated Chamber
Recommended
70-140°C if possible

Nozzle Settings

Nozzle Specs
No special concerns

Bed Adhesion

Bed Adhesion
Nano Polymer Adhesive

Layer Height

Layer Height
No special concerns

Drying Filamen

Drying Specs
120°C for 4 hours

Break Away Support

Supports
Break-Away Support

Benefits of PEEK Include:

  • Inherently flame resistant and self-extinguishing
  • Long-term hydrolytic stability even above 250°C
  • Outstanding resistance to a broad range of chemicals, including automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
  • Low smoke and toxic gas emissions
  • Excellent dimensional stability with low heat creep, low and uniform coefficient of thermal expansion, giving PEEK highly reproducible part-to-part dimensions
  • High thermal properties with a Tg of 143°C, CUT of 240-260°C, and Tm of 343°

Typical PEEK Applications Include:

  • Seals, Gears, Bushings, Bearings, Pump and Compressor Components
  • Industries Served: Auto, Aerospace, Defense, Semi-conductor, Oil & Gas

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

  • Extruder: 375-410°C
  • Bed Temp: 130-145°C
  • Bed Prep: Nano Polymer Adhesive gives us the best results
  • Heated Chamber: Recommended, an enclosure helps reduce warping and improves print success. 70-140°C if at all possible
  • Supports: ThermaX™ HTS High-Temp Support is designed to work with complex, high-temp materials just like this
  • Drying Instructions: 120°C for 4 hours

Questions?

Send us a message and we'll reach out as soon as we can!