Triton 3D – Stratasys Compatible Ultem 9085
Triton 3D Ultem 9085 was formulated to be 100% compatible with your Stratasys® printers and come with replacement chips but at a fraction of the cost of Stratasys® brand filament. Refill your Stratasys® printer with our alternative to Ultem 9085. This grade of Ultem 9085 is 100% guaranteed by Triton 3D® to work in your Stratasys® printers.
We manufacture this ultra-performance 3D printing filament using ULTEM™ 9085 PEI (polyether imide) resin. PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance. Filaments made using ULTEM™ 9085 resin offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 185°C. ULTEM™ 9085 PEI resin is manufactured by Sabic Innovative Polymers and is one of the leading high-performance polymers in the aerospace industry. We use the same ULTEM™ PEI resin that Stratasys uses – but we charge you less! Certifications available upon request.
Don’t forget your Stratasys Compatible Ultem 9085 Break Away Support.
We provide the EEPROM chip for your printer (Classic and Plus Style Chip). All you need to do is load your canister, install the chip, and start printing! [Canister Loading Instructions]
Refill and save $$$ over Stratasys® Ultem 9085.
Stratasys Compatible Ultem 9085 Benefits Include:
High thermal properties
Inherent flame resistance with low smoke evolution and low smoke toxicity
Long-term hydrolytic stability
Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
Exceptional strength and modulus, even at elevated temperatures
Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
Technical & Safety Data Sheets can be found on Triton3D.com
ULTEM™ is a registered trademark of Sabic Innovative Plastics.
Triton manufactures this filament using Sabic ULTEM™ 9085 PEI resin.
Send us a message and we'll reach out as soon as we can!