3DXMAX® Polycarbonate (PC) 3D Printing Filament
3DXMAX® PC is a premium high-heat 3D printing filament made using Lexan® Polycarbonate from Sabic. PC has some of the best mechanical properties & high-heat resistance in the 3D Printing world (Tg of 147°C). Our PC allows for the printing of functional prototypes and production parts with very fine detail and excellent surface quality. 3DXMAX® PC is suitable for use in both consumer-grade and industrial FDM/FFF printers that have a heated print bed and extruders that can reach upwards of 300°C. Made by 3DXTECH® in the USA.
Quantity: 500g (1.1lbs)
Filament Diameter Specs:
- 1.75mm +/- 0.05mm
- 2.85mm +/- 0.05mm
Recommended Print Conditions:
- Extruder Temp: 280-310°C
- Bed Temp: 110 - 120°C
- Bed Prep: ABS / Acetone Slurry on clean glass at 120°C works best for us.
- Enclosure: Although not 100% necessary, we recommend using a printer with an enclosure to help keep some heat in while printing with PC.
- Support: Our Aquatek water soluble support works great to create complex parts. This support can be found HERE.
- Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE.